Skip to main content

Aqara Philippines

Climate Sensor W100

Menu

FAQs

Once the device is connected to the thermostat, the user will receive a notice that the previously set wireless switch automations are disabled, but your settings will be saved. When the device is disconnected from the thermostat, the wireless switch automations will be restored.
When the device is connected to an Aqara hub via the Zigbee protocol and linked to an additional temperature and humidity sensor, the Secondary Area will show the data from the sensor. If no sensor is linked, the Secondary Area will display the local weather information from online sources.
To save energy, the device communicates with the connected thermostat device once every 30 minutes to synchronize data. But, when any button of the Climate Sensor W100 is pressed, they will synchronize immediately. If the user changes the settings on the thermostat device, there will be inconsistencies with the Climate Sensor W100 until they synchronise on schedule.
The data refresh frequency on the device screen depends on the sampling frequency of the sensor, and the data refresh frequency on the app depends on the device data reporting frequency. The more frequently the device reports data, the faster the data refresh rate will be on the app, but the device's battery life will be shortened accordingly. Users can choose the appropriate sampling and reporting frequency according to their personal needs through the app.
The device is not waterproof and is for indoor use only.
At present (2024) the device can only connect to 1 Aqara thermostat device. Connecting to multiple thermostat devices will be available in future versions.
This device is for indoor use only and should be placed away from direct sunlight, obstructions, or heat sources.
The display screen is 50*70mm.
At present (2024), the device can only be connected to the Aqara Radiator Thermostat E1. In the future, the device will be able to connect with other newly released thermostat devices from Aqara.
The device can connect to the following temperature and humidity sensors: Aqara Temperature and Humidity Sensor, Aqara Temperature and Humidity Sensor T1, and Aqara TVOC Air Quality Monitor.